DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA
DJI Racing Edition VR Goggles - Electromann SA

DJI Racing Edition VR Goggles

Regular price R 13,999.00 R 0.00

DJI Racing Edition VR Goggles - FPV, Superior Imaging Sensor, 2.4 & 5.8GHz, 7km Range, Touch Button Controls - F021

Key Features...

  • Enjoy a high-performance VR experience when flying your drone.
  • Direct access to flight settings and controls from integrated touch buttons.
  • Superior imaging sensor provides higher resolution video transmission than competitors.
  • Access 12 Selectable low-interference transmission channels for an uninterrupted flight.

DJI Racing Edition VR Goggles

DJI Racing Edition goggles for use with your drone make it feel as though you're flying. These incredible VR goggles are like being in front of an IMAX screen as you see the world from the perspective of the camera on your drone. The racing edition goggles are a step up from the standard. They feature racing frequencies, a camera and transmitter for your drone, a mount for racing antenna and, most importantly, reduced latency. 

The fantastic performance of these VR goggles are ideal for racing through the skies as the FPV is delivered with speed, stability, and clarity thanks to the OcuSync video transmission module that brings dual band 2.4 and 5.8GHz frequencies with a low latency of just 50ms and allows for a control range of up to 7km. 

There are 12 selectable transmission channels that allow multiple headsets and drones to operate simultaneously in the same area without interference. The camera module uses a 1/3 inch image sensor that provides high res video transmission that's superior to most other FPV goggles. 

Integrated touch buttons on the side of the VR DJI Goggles RE bring access to the flight settings such as gimble control, flight data and more. The goggles aren't just restricted to racing drones and can be used with other vehicles and robots offering a range of applications from building inspection to search and rescue. 

Manufacturer Specifications

Screen

  • Screen Size: 2x 5-inch
  • Screen Resolution: 3840x1080 (Single Screen: 1920x1080)
  • Transmitter Power (EIRP): 2.4 GHz: 25.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC)
  • Transmitter Power (EIRP): 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 18.5 dBm (SRRC)
  • Live View Modes: 1080p 30fps, 720p 60fps, 720p 30fps
  • Video Format: MP4 (H.264)
  • Supported Video Play Format: MP4, MOV, MKV
  • Audio format: AAC-LC, AAC-HE, AC-3, DTS, MP3
  • Battery Capacity: 9440mAh
  • Charger Input: 100-240 VAC, 50/60 Hz, 0.5A
  • Output: 5V 3A/9V 2A/12V 1.5A
  • Operating Temperature Range: 0 to +40 Degree Celsius

Camera

  • Communication Frequency: 2.4 GHz/ 5.8 GHz
  • Transmitter Power (EIRP): 2.4 GHz: 22.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC)
  • Transmitter Power (EIRP): 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 25.5 dBm (SRRC)
  • Live View Modes and Min. Latency: 960p50:70ms / 720p60:60ms / 480p50:50ms
  • Max. Transmission Distance 2.4 GHz: 7km(FCC) / 4km(CE) / 4km(SRRC)
  • Max. Transmission Distance 5.8 GHz: 4km(FCC) / 0.7km(CE) / 4km(SRRC)
  • Recommended Frequency Band: 5.8GHz / CE:2.4GHz / SRRC:5.8GHz
  • Video Format: MP4 (MPEG4)
  • I/O Interface: S.Bus, Micro USB, PPM, UART, MMCX, Micro SD card slot
  • Supported Flight Control System: F3, F4, KISS, NAZE
  • Supported Remote Controller: X9D(Frsky)/DEVO 10(Walkera)/T8FG(Futaba)/T 14SG(Futaba)/WTF09sll(WFLY)/AT9S(RadioLink)
  • Operating Temperature Range: 0 to +40 Degree Celsius
  • Input Power: 9 - 16.8V (3S-4S)
  • Sensor: 1/3 CMOS 1.2MP
  • Lens: 2.65mm f/2.0
  • Lens Group: 6G + IR
  • Shutter: Global Shutter
  • ISO: 100 - 3200
  • FOV: 148 degree(D) / 111 degree(H) / 79.5 degree(V)
  • Micro USB OTG Cable is required when working with Spark
  • HDMI (Type A) Female to HDMI (Type C) Male Adaptor is required when working with Inspire 1 series
  • Automatic FHSS Technology

Dimensions

  • Main Product Dimensions: 195x155x110 mm (L x W x D)
  • Main Product Weight: 1520g

Package Contents

  • DJI Goggles Racing Edition
  • Charger
  • Wire Clip
  • 2x Pagoda Antenna(SMA Interface)
  • Reversed SMA Connector
  • Micro USB Cable
  • HDMI Cable
  • Cleaning Cloth

Share this Product


More from this collection